Improvement of laser shock peening depth through regulation of surface optical absorption
编号:307 稿件编号:379 访问权限:仅限参会人 更新:2022-10-08 09:13:12 浏览:393次 口头报告

报告开始:2023年04月23日 09:15 (Asia/Shanghai)

报告时间:15min

所在会议:[I] 激光加工及增材制造技术论坛 [I1] 上午场

暂无文件

摘要
Laser shock peening is conducted to enhance the mechanical properties of metals. Efficient optical absorption of metal surface is desirable to increase the laser shock peening depth. In this work, a method is proposed to regulate the absorption behavior by surface colorizing to increase the affected depth and magnitude of nanosecond laser shock peening (NLSP). Colorized samples are fabricated with high absorption of 400–1500 nm, which is 89% higher than that of un-colorized samples. This regulated optical response is attributed to the multi-reflection/absorption behavior within nano-to-microscale structures. Nano-to-microscale structure-based approaches offer controllable concurrent tailoring of a higher residual stress depth and greater magnitude. Black samples exhibit higher affected depth (64.71%) and magnitude (17.87%) values for the compressive residual stress than un-colorized samples with unit peak power density after NLSP. Experimental results show that coarse grains are refined on surfaces, and the depths of grain refinement and dislocation propagation increase for colorized samples, which exhibit a regulated surface optical behavior. Therefore, this study represents a promising approach that the regulation of surface optical absorption of metals can be incorporated into the improvement of laser shock peening depth.
关键字
optical absorption regulation,laser shock peening,affected depth,grain refinement,dislocation generation
报告人
贺广智
清华大学机械工程系;高端装备界面与技术全国重点实验室

稿件作者
贺广智 清华大学机械工程系;高端装备界面与技术全国重点实验室
闫剑锋 清华大学机械工程系;高端装备界面与技术全国重点实验室
发表评论
验证码 看不清楚,更换一张
全部评论
登录 注册缴费 提交稿件 酒店预订